Filter
Top Products
Changing the programme sequence
53
Adding or removing laundry af‐
t
er the programme has started
P
ress the
Start/Stop b
utton.
The following will appear in the display:
Cancel programme
Scr
oll up the list with the or sen‐
sor to:
Add laundry
Touch the OK sensor.
If this message does not appear in the
display then it is no lo
nger possible to
add or remove items of laundry.
The programme will stop and the door
will unlock.
P
ull open the door.
Add
or remove items.
Clo
se the door.
P
ress the
Start/Stop b
utton.
The programme will continue.
Please note:
Once a programme has started the
washing
machine cannot recognise any
adjustment to the load.
For this reason, if laundry is added or
r
emoved after the start of a programme,
the machine will always complete the
programme cycle assuming a full load
The door cannot be opened, if:
– the suds temperature is above 55°C.
– the water is above a certain level.
– the programme has reached the Spin
stage.
If you want to open the door when the
above con
ditions are present you will
need to cancel the programme.
The safety lock will remain activated if
the t
emperature in the drum is above
55°C. The lock will not deactivate until
the temperature has dropped to below
55°C.