Filter
Top Products
Spinning
38
To omit the final spin (Rinse
hold)
Use the Spin speed butt
on to select
the setting (Rinse hold). The laun‐
dry is not spun after the final rinse
and remains in the final rinse water.
This helps prevent creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
– To start the final spin:
The washing machine will display the
maxi
mum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the
Start/Stop butt
on.
– To end the programme:
Use the Spin speed button to select
the 0 rpm setting (Without spin) and
press the
Start/Stop butt
on.
The water will drain away.
To omit rinse and interim spin
and the final spin
P
ress the
Spin speed butt
on.
Select the 0 rpm setting.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in.
In some programmes an additional
rinse is in
troduced with this setting.