Miele 06 533 690 Washer/Dryer User Manual


 
The Miele water protection
system
The Miele water protection system
protects machine from water damage.
The system consists of three main
components:
1) the inlet hose
2) the electronic unit and the machine
housing
3) the drain hose
1) Inlet hose
The inlet hose is tested to withstand
pressure of more than 14,000 kPa.
It has a protective sleeve which is
made from metal to protect the hose
from damage.
2) Electronic unit and machine
housing
Sump
Any leaking water is collected in a
sump in the base of the machine. A
float switches off the safety valves,
preventing any more water flowing
into the machine and water in the
suds container is pumped away.
Overflow protection
This prevents the maching taking in
too much water. If the water level
exceeds a certain level, the drain
pump switches in and pumps the
excess water away.
3) Drain hose
The drain hose is protected by a
ventilation system which prevents the
machine from being emptied
completely.
Installation and connection
71