Miele 06 533 690 Washer/Dryer User Manual


 
Fault messages in the display
Message in the display Possible cause Remedy A
q
Drain
fault
The water outlet is
blocked or
restricted.
The drain hose has
been fixed too high.
Clean the drain filter and
the drain pump as
described in "Opening
the drum door in the
event of a blocked drain
outlet and/or power
failure".
The maximum drain
height is 1 m.
p
Inlet
fault
The water inlet is
blocked or
restricted.
Check whether
the stopcock is opened
wide enough.
the inlet hose is kinked.
o
WPS
activated
The water protection
system has reacted.
Call the Service
Department.
ä
Drum lighting
fault
The drum lighting unit
is not fitted correctly.
Fit it correctly.
,
Technical fault
Call the Service
Department
There is a fault. Start the programme again.
If the fault message
appears again, contact the
Service Department.
ATo switch off the fault message: Switch the machine off with the I-On/0-Off
button.
Problem solving guide
51