Filter
Top Products
Spinning
The maximum final spin speed
depends on the programme chosen.
Programme rpm
Cottons 1600
Minimum iron 1200
Delicates 600
Silks 400
Woollens 1200
Express 1600
Automatic 1200
Dark garments 1200
Shirts 600
Denim 900
Sportswear 1200
Outerwear 800
Proofing 1000
Curtains 600
Separate rinse 1200
Starch 1500
Drain/Spin 1600
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons programme, an additional rinse
is introduced.
To omit the final spin (Rinse hold)
^
While the spin speed is highlighted in
the display, press the minus (-) button
repeatedly to call up the Rinse hold
setting and then press OK to confirm
your selection.
The laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
–
To start the final spin
:
The machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the Start/Stop button.
– To end the programme
:
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
To omit rinse and interim spin and
the final spin
^
While the spin speed is highlighted in
the display, press the minus (-) button
repeatedly to call up the Without spin
setting and then press OK to confirm
your selection.
The laundry is not spun after the final
rinse. The water will drain away and
the machine will go straight into the
anti-crease stage. An additional rinse
is introduced if this setting is selected
with the Cottons, Minimum iron,
Express and Automatic programmes.
WASHING
23