Filter
Top Products
14-9
39 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
11E : front
loading
washing
machine
error
E9 Water leakage ERR AS rerecom-
mended
Check
whether there
is foreign ma-
terial inserted
in the drain
fi lter.
- In this case you are recommended our
engineer’s inspection.
40 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
door : front
loading
washing
machine
error
Ed:Door being not opened AS rerecom-
mended
It may appear
when the the
door is opened
a certain
minutes after
the completion
of washing or
the electricity
is interrupted
in running.
Check of Bad
contact of 1st
door opening
sensor----
*check of
the bending
of 2nd door
switch*Do not
open the door
-There is a cover dettachable at the front bot-
tom. Pull out the cover to fi nd the handle to open
at the right side. Pull out the handle to open
the door.
41 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
front
loading
washing
machine
error
E6:Overheating error AS rerecom-
mended
It may appear
when the
temperarture
rises rapidly.
- In this case you are recommended our
engineer’s inspection.
42 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
water
supply
related
Cold water being not
supplied
General
consulting
- Check fi rst whether the water supply is cut
and also check whether the foreign material is
inserted. If the foreign material is inserted turn
the connection hose of machine to the left to
disconnect and to fi nd the strainer to trap the
foreign material.
43 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
water
supply
related
Water being supplied little General
consulting
It may appear
when the tap
is not opened
properly or
there is a for-
eign material
inside.
- Is it checked whether the tap is fully open
or there is a foreign material inserted? - First
check whether the tap is fully open. And there is
no fault turn the hose of the machine to the left
to take out strainer in the hole of water entrance.
Clean i
44 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
water
supply
related
Detergent being remained General
consulting
It may appear
when the long-
term used
detergent is
not well sol-
uted or when
the water
temperature
is low during
winter.
- Sove the detergent wth the hot water and put it
inot the washing box.
If it is not solved even with the normal detergent
request an engineer’s inspection.
45 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
water
supply
related
Water being stopped dur-
ing the coming in
General
consulting
It may appear
when the
water is cut
or the water
supply hole is
clogged.
- Is it checked whether the water is cut or there
is a foreign material inserted in the water supply
hole? -First check whether the water is cut and
if there is a blackout push the power button on.
Otherwise turn the machine hose to the left to
take out t
46 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
water
supply
related
Clothes being damaged General
consulting
- In this case you are recommended our
engineer’s inspection.
47 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
water
supply
related
One direction rotation - In this case you are recommended our
engineer’s inspection.
48 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
water
supply
related
Rotation being not worked
after it sounds with buzz
- In this case you are recommended our
engineer’s inspection.
49 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
water
supply
related
Water being not supplied
in winter
It may appear
when the tap
and the water
supply hose
are frozen if it
is used at the
veranda in the
winter.
- Make the water supply hole warm and defreeze
it with wet towel.