Filter
Top Products
14-7
20 DRUM
WASHER
(MOEL
NAME
:Q1*3*)
water le
akage
related
Natural
drain(continually)/water
not fi lling tub
General
consulting
It can be
appeared at
the drum
washing ma
chine of
which the
drain hose
is located
at the
bottom.
- For the machine having the drain hose at the
below of that raise the drain hose up and fi x it
to the fi xer at 2/3 point of the machine. If the
hose is used at the fl oor all water supplied will
drain fully.
21 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
smell/
smoke
Burning smell General
consulting
For the initial
use of
product
It may appear
during the
operaiton
with coupling
each other
but it
carefully
watched
by the
customers
who are
using more
than for 3
years.
- Is that a newly bought one?
- A smell is disappeared after 4~5 days passed
in case of newly bought one but it depends upon
the frequency of use. Be sure to use it without
worry. If is not disappeared contact a engineer
22 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
smell/
smoke
Burning/smoke General
consulting
Pull out the plug in
case of smoke or
fi re.
It can be
shown in
case that the
interior
components
of the
products do
not work
normally.
- In this case you are recommended our
engineer’s inspection.
23 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
power
soruce
related
Power not supplied AS
rerecom
mended
It can be
shown in
case that
the power
cord is not
inserted or
electricity is
blacked out
or the interior
components
of the
products do
not work
properly.
- Take out the power cord and put it in again and
check whether the power for the other products
is on. If it is not even after that you are recom-
mended our engineer’s inspection.
24 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
power
soruce
related
Current leakage breaker
being dropped
General
consulting
It may be
occurred when
the humidity is
full inside the
machine.
- In this case you are recommended our
engineer’s inspection.
25 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
power
soruce
related
Autmatic stop during
operation
AS rerecomm
ended
It may be
occurred when
there are too
much laundry.
-Reduce the contents to be washed. If it
continues you are recommended our engineer’s
inspection.
26 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
power
soruce
related
Being power off frequently AS rerecomm
ended
It may be
occurred in
case of the
bad contact of
button.
- In this case you are recommended our
engineer’s inspection.
27 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
operation
related
Button being not operated Consulting It may be
occurred
when the
accumualtion
of foreign
material or
moisture
ingress into
the button.
- In this case you are recommended our
engineer’s inspection.
28 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
operation
related
Being not rotating during
washing
AS rerecomm
ended
It may be
occurred when
the water
supply not
completed
or the cover
not closed
completely
or the
accessories of
products have
a abnormallity.
- First check whether the tap is open and the
cover closed and then request an engineer’s
inspection.