Filter
Top Products
14-8
29 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
4E :front
loading
washing
machine
error
Water level sensor
inferiority
AS rerecomm
ended
This may be
happened
when there
is any foreign
material inside
the water
supply and
drain valve
or the interior
components of
the prodcuts
do not operate
normally.
- Water
level sensor
or mother
rotation.
- Disconnect the water supply hose and check
whether there is a foreign material inserted in it.
And then request an engineer’s inspection.
30 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
5E :front
loading
washing
machine
error
Water being not drained AS rerecom-
mended
It may be
occurred when
the drain hose
is go over the
threshold or
water is not
drained.
It may eb
occurred when
the The fi lter
of pump-drain
moder is fulled
with dregs,
Check the installation of drain hose and then
if there is no trouble request an engineer’s
inspection.
Clean the fi lter of pump-drain motor. Guided by
instruction-manual.
31 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
OE :front
loading
washing
machine
error
3E OVER-FLOW General
consulting
It may be a
case that the
supply water
level is not
detected.
- After Draining the water power off and on and
operate again. If it dose not work after so doing
request an engineer’s inspection.
32 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
UE :front
loading
washing
machine
error
4E UNBALANCE ERR General
consulting
It may be hap-
pened when
the fl oor of the
installed palce
is not fl at or
the clothes are
entangled.
Level the machine or arrange the entangled
clothes. If it does not worked even after so doing
request an engineer’s inspection.
33 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
HE1 : front
loading
washing
machine
error
E5 WATER HEATER ERR General
consulting
It may happen
when the
boiling tem-
peratuer rised
rapidly. (It is
also because
too much
detergent are
used.)
Use the proper amount of detergent and power
off the machine till the temperaure is cooled
down.
And if it does not work even after so doing
request an engineer’s inspection.
34 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
HE : front
loading
washing
machine
error
E6 WATER HEATER ERR AS rerecom-
mended
It may appear
when it dose
not reach to
the set tem-
perature within
a certain time.
- In this case you are recommended our
engineer’s inspection.
35 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
1E :front
loading
washing
machine
error
E7 Water level sensor
ERR
AS rerecom-
mended
It may happen
when there is
a trouble in air
hose or water
level sensor.
- In this case you are recommended our
engineer’s inspection.
36 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
cE : front
loading
washing
machine
error
E8 Abnormal water tem-
perature ERR
AS rerecom-
mended
Check
whether the
hose for hot
and cold water
is connected
to the water
supply hole.
- Check whether the cold water is supplied
through the cold water supply hole and if
it doesn’t work after so doing request an
engineer’s inspection.
37 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
8E : front
loading
washing
machine
error
E9 Water leakage ERR AS rerecom-
mended
Check
whether there
is foreign ma-
terial inserted
in the drain
fi lter.
- In this case you are recommended our
engineer’s inspection.
38 DRUM
WASHER
(MODEL
NAME :
Q1*3*)
tE :front
loading
washing
machine
error
E9 Water leakage ERR AS rerecom-
mended
Check
whether there
is foreign ma-
terial inserted
in the drain
fi lter.
- In this case you are recommended our
engineer’s inspection.