Filter
Top Products
5-3
Part Name
Descriptive Picture
How To Do
Front Panel
Removal
Front Bulk-
head
Removal
Moisture
Sensor
Removal
####
1.Disconnect power supply to unit.
2.Remove Top Cover.
3.Remove Console.
4.Remove four screws attaching
Front Panel to dryer.
5.Remove two screws in the door
area.
6.Pull Front Panel forward and
disconnect the Interior Light
harness.
7.Lift the Front Panel off the three
tabs across the bottom and
remove.
1.Disconnect power supply to unit.
2.Remove Top Cover.
3.Remove Console.
4.Remove Front Panel.
5.Remove screws retaining
Console Back Cover.
6. Disconnect Interior Light wiring
harness.
7.Disconnect Moisture Sensor
wiring harness.
8.Remove four Bulkhead retaining
screws.
9.Lift Bulkhead from Cabinet and
remove.
1.Disconnect power supply to unit.
2.Remove Top Cover.
3.Remove Console.
4.Remove Front Panel.
5.Disconnect Moisture Sensor wire
harness.
6.Remove sensor attachment
screw.