Filter
Top Products
4-3
4-2-3. Sensor Bar Touch Data Mode
Defi nition of Sensor Bar Touch Data Mode:
-While in Power On pressing Signal and Temp Keys for 3 seconds
-This action will put the dryer into sensor bar touch data mode
- Dryer will display Sensor Bar data. This mode is default mode of entering service mode
How to Enter:
- While in Power off pressing Signal and Temp Keys for 3 seconds (same for all Frontier models.)
4-2-4. Cycle Count Mode
Defi nition of Cycle Count Mode:
- While in Service Mode pressing the Signal key will put the dryer into the cycle count mode
- Cycle number executed will display.
How to Enter:
- To enter Special Test Mode press While in Service Mode pressing the Signal key for 3 seconds or until
the control beep.
(same for all Frontier models.)