Electrolux W4180N/S Washer User Manual


  Open as PDF
of 140
 
87
8
6662
6663
Motor and motor control
Repairs
Repair work on the machine should only be
done by specially trained personnel.
Motorreplacement
Disassembly
1. Takedownpowerfromthemachine.
2. Removetherearcover.
3. Undothebracketforthedrainhoseconnec-
torfromthelowerrearpiece,thenremovethe
rear cover.
4. Undothegroundconnectionfromthemotor.
5. Removethedrivebeltbypullingthebelt
towards you while rotating the drum by hand.
6. Undothemotorcablefrommotor.
7. Lockthemotorinplacetoavoiditfromfalling
whenliftingitout.
8. Undoandremovethetwomotormounting
bolts.
9. Liftoutthemotor.
10. Replacethesensorandmagnetfromtheold
motor into the new one.
Assembly
1. Fitthenewmotor withoutlockingthemoun-
ting bolts.
2. Fitthedrivebeltandadjustthebelttension
withthetensionerononesideofthemotor.
SesectionAdjustments-Drivebelttension
fordetails.
3. Connectthenewmotortothecableanduse
straps to secure the cable.
4. Connectthemotorcabletothemotor.
5. Fit the lower rear piece and secure the drain
hose connection with screws.
6. Fittheupperrearpiece.
7. Connectthevoltagesupplyandverifythatthe
motor operates normally.
8
Motorcable
Mountingbolt
Spacer
H – model
S och N – model
Motorcable
 previous next