Electrolux W4180N/S Washer User Manual


  Open as PDF
of 140
 
83
Motor and motor control
The motor control is also able to deliver the various instantaneous and
output values during constant speed, acceleration and retardation. These
valuesareusedtocalculatetheweightoftheloadedlaundryandtodetect
anyloadimbalances.Aseparateunbalanceswitchcanalsobeconnected
to the motor control.
Whenthedruminadrainsequencestartsitsaccelerationfromwashrpm
todistributionrpm,theextremeunbalancemeasurementwillstartonce
about90%ofthedistributionrpmhasbeenattained.Subsequently,during
the entire remaining super unbalance measurement, the distribution time
andduringtheentiresubsequentextractiontime,theprogramunitwill
detectwhetherthereisanyextremeunbalance.
Incaseofextremeunbalancethatcanariseife.g.aspringstrutisdefec-
tiveorwhenwashinginsacks,theaccelerationwillbestoppedtowaitfor
thedrumtostop.Ifextremeunbalancearisesduring:
a. distribution or during super unbalance measurement, the drain se-
quencewillrestartfromthebeginning.Thenumberofrestartattempts
can be changed in the system data but is usually set to 5. The value can
alsobechangedviaconguration2.
b. extraction,theprogramwillstopandmovetothewashsequenceafter
extraction.
Thesafetysystemofthemachineincludesdoubledetectionofthedoor
lock.Boththeprogrammeunitandmotorcontrolusedifferentswitchesto
detectproperdoorlocking.Themotorcannotstartunlessbothswitches
verifythedoorislocked.
 previous next