Filter
Top Products
51
QUICKSTARTBUTTON1and 2 (COIN)
Select if the two buttons, available on the Compass timer, shall be used as
quick start buttons or as option buttons.
Yes = The button is set to quick start.
No = The button is set to option button.
NOTE!
Only in GEN6COINOP software and Freescale microprocessor S12.
VOLUME
Set the volume on the voice guidance board (if the machine is equipped
with voice guidance).
A value between 0 and 255 can be used where 0 will turn the voice gui-
dance off
VGB.WELC.TIMEOUTSEC.
Select if a welcome message will be sent out from the voice guidance or
not. If timeout gone and machine not operating, a welcome message will
be sent out from the voice guidance if door opened/closed, any buttons
pressed or program selector used.
If timeout not gone, welcome message will be omitted.
VGB. MESS. ANTICR. SEC.
Select if anticrease message shall be sent out or not by the voice guidance
system after drying. The anticrease function will make the drum moving
backwards and forwards a certain time after the drying cycle has ended.
When the machine enter anticrease after drying, a message will always be
sent out that door can not be unlocked if program selector is pressed. This
message will be repeated with a frequency defined by the time set in this
menu. 0 = no message will be sent out.
UNLOCKDOORTIMEOUT
Use the knob to set the time in minutes that the door will be locked.
For example if the value is set to 30, the door will be unlocked after 30
minutes from program end.
Default value is set to 0 minutes, inactive.
SETSOONREADYMSG
Use the knob to set the time in minutes that shall be left of the program
before a text message will be send to the customer.
Forexampleifthevalueissetto10thetextmessageYOURLAUNDRY
WILLBEFINISHEDIN10MINUTESwillbesendtothecustomer10minu-
tes before program end.
Default value is set to 0 minutes, inactive.
Program unit