Filter
Top Products
120
Troubleshooting
Error code 15, EMERGENCY STOP
This error code is generated by the CPU board. The error code arises if the
emergency stop switch has been activated on the machine.
The cause can be inadvertent activation of the emergency stop, defective
emergency stop switch, incorrect or shorted cable, etc.
Error code 16, TIMEOUT HEATING
This error code is generated by the CPU board. The error code is based
on degrees/minutes. A check is made during water filling. If there is a drain
leakage there will be repeated fillings and therefore no error code from gra-
dient check. This timeout is an overall timeout that is started when heating
isstarted.IfheatingtimeislongerthansetinHEATINGTIMEOUT,SEC
(Config 2) this error code will be activated.
Error code 17, DOOR LOCK
This error code is generated by the CPU board. The error code arises if the
door lock is locked at the start of the wash program, i.e. that the door is
locked although the CPU board has not requested locking.
Error code 18, START NOT ALLOWED
The machine’s program unit has been disabled by a superior monitoring
system.
Actions
• Contactthesupplierofthemonitoringsystemforpossiblecausesofthe
monitoring system disabling operation of the machine.
Error code 19, MASTER COMM.
Communication with superior system has been broken. The cause can be
an error in the network connections, damaged cable, defective monitoring
system, etc.
Action:
• Contactthesupplierofthemonitoringsystemforpossiblecausesofthe
monitoring system not communicating.