Filter
Top Products
4. Printing Directly from Applications
GT-541
33
Convert to Bitmap:
(1) Select [ Bitmaps ] > [ Convert to Bitmap... ] menu.
(2) CorelDRAW 10/11/12: Make sure that "Color" is RGB and "Apply ICC Profile" is OFF.
CorelDRAW X3: Make sure that "Color" is RGB and "Apply ICC Profile" is ON
<Important!>
The platen size may become 14x16 inches when pressing Set From Printer, even after setting the
size of 10x12 inches at "Document Properties" dialog box of Printer Driver. To make print data in
platen size of 10x12 inches, set Width : 10 inches, Height : 12 inches.
If the print data file is not saved from the printer driver menu but application menu, the extension of
the print data is automatically ".prn" although you added .arp. Before you use GT File Viewer to print,
change the extension to ".arp" manually.
There are some cases reported in CorelDRAW 11/12 that outline Colors of curved texts (often by
Envelop Effects) are not fully printed. In those cases, convert the text object into Bitmap before you
print or check "Rasterize entire page (DPI)" checkbox in [ Misc ] tag of [ Print ] menu. The default DPI
is 400, but 200-300 dpi will be enough to save time.