Filter
Top Products
7. Troubleshooting
GT-541
101
(14) Insert the Wiper Cleaner Cassette straight into your printer.
<Note>
Do not touch the Clearance Sensor (the bar above the Wiper Cleaner Cassette);
(15) Close the Front Cover, and then turn on your printer.
If your printer turns on without any problem, replacement of the Wiper Blade has been completed.
If there is problem ( such as abnormal noise or an error )then turn off your printer, and check if the
Wiper Blade, the Wiper Cleaner and the Wiper Cleaner Cassette are correctly installed.