Filter
Top Products
7. Troubleshooting
GT-541
92
(20) Take off the gloves, insert the flat cable into the connector, and then turn down the connector tab to
lock the cable.
<Note>
Make sure the flat cable is inserted straight against the connector. If not, reconnect it correctly.
The flat cable is very fragile. Be careful with handling it.
(21) Put on your gloves again, and then remove the tube fitting from the end of tube.
(22) Insert the tube into the new Print Head, and then rotate the tube connector 90 degrees to the
direction of the arrow.
(23) Close the Front Cover.
(24) Remove the Filter Cartridge, and then install the cartridge previously removed.
(25) Turn on your printer.
(26) Press the Platen Button to eject the Platen.