Filter
Top Products
113068-7 www.amdry.com 37
The dryer is equipped with a pneumatically operated heat reclaimer damper, which when opened, will recirculate
approximately fifteen percent (15%) of the dryer’s exhaust air.
The heat reclaimer damper is closed until ignition of flame has been established. Then, the damper piston is
actuated, opening the dampers recirculating fifteen percent (15%) of the exhaust air back over the gas burner
and into the tumbler (basket). The damper remains open for the rest of the drying cycle. On cool down, the
damper closes, exhausting ALL of the 13,000 cfm (368.2 cmm), which ensures a fast cool down of the LOAD.
HEAT RECLAIMER SETTINGS
Z = 1-5/8” (4.13 cm)
Y + Z = X Y %HR Inches Reclaimed
1-1/8”
(2.86 cm)
1/2”
(1.27 cm)
7.46 1-1/4”
(3.17 cm)
2-5/8”
(6.67 cm)
1”
(2.54 cm)
15.67 2-5/8”
(6.67 cm)
3-1/8”
(8 cm)
1-1/2”
(3.81 cm)
25.37 4-1/4”
(10.8 cm)
3-5/8”
(9.21 cm)
2”
(5.08 cm)
34.32 5-3/4”
(14.61 cm)
4-1/8”
(10.48 cm)
2-1/2”
(6.35 cm)
43.28 7-1/4”
(18.42 cm)
4-5/8”
(11.75 cm)
3”
(7.62 cm)
50.74 8-1/2”
(21.6 cm)
5-1/8”
(13.02 cm)
3-1/2”
(9 cm)
58.95 9-7/8”
(25.1 cm)
FULL OPEN 16-3/4” (42.55 cm)
Shaded areas are stated in metric equivalents