Filter
Top Products
Installation
M414038
20
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9. Check the airflow switch operation by opening
the lint panel; be sure to remove shipping tape
from airflow switch prior to operation. Refer to
Figure 21 and Figure 22. The heating systems
should shut off when the lint panel is opened a
maximum of 6 inches (152.4 mm). The airflow
switch operation may be affected by lack of
make-up air or an obstruction in the exhaust duct.
These should be checked; if there is a problem
contact an authorized service person.
10. Wipe out the cylinder using an all-purpose
cleaner or detergent and water solution.
If tumbler does not meet any of the above
requirements, remove tumbler from service. Refer to
Removing Tumbler from Service Section.
Required for CE Marked Models
Once machine is installed, please be sure to complete
the following items:
● Review and verify machine operation with
customer.
● Leave Operating Instructions and a signed
Declaration of Conformity with customer.
● Review machine warranty information with
customer.
● Apply warning sticker on front panel of machine,
in language appropriate to country of sale (found
in literature packet).
The tumbler must not be operated if the
airflow switch does not operate properly.
Faulty airflow switch operation may cause
an explosive gas mixture to collect in the
tumbler.
W072
WARNING