Filter
Top Products
© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Programming
29
F232179
Cycle Charts for Domestic OPL
(For Models Built Before April 2005)
Models with these default cycles will display P-F1
after power is applied to machine.
.
Table 6 (Continued)
Cycle Steps
Normal
Hot
Light
Soil
Hot
Heavy
Soil
Hot
Stained
Hot
Perm
Press
Hot
Visa
®
Warm
Uniforms
Delicate
Cold
Cycle reference
(display in PROGRAM mode)
CY01 CY02 CY03 CY04 CY05 CY06 CY07 CY08
Agitation in effect for cycle
(sec)
12/3/12
Normal
12/3/12
Normal
12/3/12
Normal
12/3/12
Normal
12/3/12
Normal
12/3/12
Normal
12/3/12
Normal
3/12/3
Gentle
Wash 1 (WASH indicator)
Time for agitation (min) 2 7 2 4 7 2 2 5
Fill valves (temperature) Both
(warm)
Both
(warm)
Both
(warm)
Cold Hot Both
(warm)
Both
(warm)
Cold
Fill water level High Low High Med Low High High High
Supply 0 2 0 1 2 0 0 1
Heat (if enabled) 0 0 0 0 0 0 0 0
Drain Yes Yes Yes Yes Yes Yes Yes Yes
Spin (only if ‘drain’) seconds 0 0 0 0 0 0 0 0
Wash 2 (WASH indicator)
Time for agitation (min) 7 2 7 9 2 7 7
Fill valves (temperature) Hot Hot Hot Hot Hot Both
(warm)
Hot
Fill water level Low High Low Low High Low Low
Supply 2 0 1 1 0 1 2
Heat (if enabled) 0 0 0 0 0 0 0
Drain No Yes Yes Yes Yes Yes Yes
Spin (only if ‘drain’) seconds 0 0 0 0 0 0 0
Wash 3 (WASH indicator)
Time for agitation (min) 2 6 9 7
Fill valves (temperature) Hot Hot Hot Both
(warm)
Fill water level High Low Low Low
Supply 0 2 2 2
Heat (if enabled) 0 0 0 2
Drain Yes No No No
Spin (only if ‘drain’) seconds 0 0 0 0