Filter
Top Products
© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Programming
9
F232179
Cycle and Error Count
The control logs cycle count (total of all cycles
completed).
1. To read, enter PROGRAM Mode.
2. Press START (Enter) keypad. Display will show
the cycle count.
3. Press START (Enter) keypad. Display will show
certain error conditions that may have been
recorded by the control.
4. Press START (Enter) keypad. Display will show
drain error conditions (“Erdn”) that may have
been recorded by the control.
5. Press START (Enter) keypad. Display will show
fill error conditions (“ErFL”) that may have been
recorded by the control.
6. Read the information when consulting technical
assistance as needed.
7. Step through the error log by pressing START
(Enter) keypad repeatedly until display reverts to
normal PROGRAM Mode (“0000” or a
temperature).