3. BASIC OPERATIONS
Feed the table so that the display shows 0.000.
Even when a machining error is produced, it will never be accumulated because
the error correction to the next target is automatically undertaken.
Continue the machining while recalling the target values successively by
pressing the LOAD key.
Step 8 If the set numbers of the pitch machining is completed, the counter returns to the
display of the first target value.
If the machining is complete, or to abort machining, press the Cancel key and
quit the pitch machining function.
NOTE
• The entered setup item data will not be lost even after the power is off. Each piece of
data can be saved in memory as the independent setup data for each coordinate. At the
next input of the setup data they will be automatically recalled (auto-recall).
• When the pitch machining function is terminated, the table will be restored to the
coordinate existed before the pitch machining function began.
• Pitch machining data will be saved in memory for each coordinate.
No. 99MBE032A
3-23
