Sun Microsystems X4640 Clothes Dryer User Manual


  Open as PDF
of 72
 
TABLE1 SIA StateFile Variables (Continued)
Variable Description(DefaultsinBold)
Requiredfor
LinuxInstall
Required
for
Firmware
Upgrade
apit.remoteUpdateURL If youspecied “true” for remoteUpdate, tells SIA
where to lookfor SIA softwareupdates. Values
supported: Any URLwith updated SIAcontent les.
You only needto specify this variable if youare not
using the defaulturl.
Default url:
http://sia-updates.sun.com/remoteUpdate
X (if
remote
Update is
true and
default url
is not
used)
X (if
remote
Update
is true
and
default
url is not
used)
apit.networking TellsSIAit has permission to workover the network.
If true,SIA willcongure network settings based on
networkcong variables. Valuessupported: true |
false
Example: apit.networking=true
XX
apit.networkcong.needNetwork If you specied “true” fornetwork, tells SIA whether
network access isrequired for a particular task.
Values supported: true| false
Example: apit.networkcong.needNetwork=true
X (if
networking
is true)
X (if
networking
is true)
apit.networkcong.activeNic If youspecied “true” for network, tells SIA which
network interface isconnected to the active network.
Values supported: eth0| eth1 | eth2 | eth3... etc.
Example: apit.networkcong.activeNic=eth0
X (if
networking
is true)
X (if
networking
is true)
apit.networkcong.NetworkType If youspecied “true” for network, tellsSIA the
conguration of theactive network interface. Values
supported: static |dhcp
Example: apit.networkcong.NetworkType=dhcp
X (if
networking
is true)
X (if
networking
is true)
apit.networkcong.useDHCP If youselected “dhcp” as the NetworkType, tellsSIA
to obtain theserver’s address from the DHCP server.
Values supported: true| false
Example: apit.networkcong.useDHCP=true
X (if
networking
is true)
X (if
networking
is true)
apit.networkcong.ipeld If youselected “static” as the NetworkType, tellsSIA
to use theserver’s IP address value you provide.
Example: apit.networkcong.ipeld=n.n.n.n
X (if static
IP is used)
X (if
static IP
is used)
apit.networkcong.gatewayField If youselected “static” as the NetworkType, tellsSIA
to use theIP address value you provide.
Example: apit.networkcong.gatewayeld=n.n.n.n
X (if static
IP is used)
X (if
static IP
is used)
Contentsofthe SIAStateFile
45
 previous next