Filter
Top Products
In critical applications where very
high requirements have to be met,
it is strongly recommended that all the
relevant factors for the process, such
as cleaning agent, quality of water etc.
are discussed with the Miele
Applications Specialists.
The mobile units and special
inserts should only be used for
their specific application.
Empty any containers or utensils
before arranging them in the
machine.
Do not allow any remains of acids
or solvents, and in particular
hydrochloric acid, chloride solutions or
corroding ferrous material to get into
the wash cabinet. Similarly avoid any
materials with a corrosive effect. The
presence in compounds of any solvents
should be minimal.
Ensure that solutions or steam
containing hydrochloric acid do not
come into contact with the steel outer
casing of the machine to avoid any
corrosion damage.
Please follow the advice on
installation in these instructions
and the separate Installation
Instructions.
Using accessories
Only specific additional equipment
made by Miele should be
connected to this machine. Consult the
Miele Professional Group on the type
and application of such equipment.
Disposal of an old appliance
When discarding a lab washer,
disconnect it from the power
supply, remove the door to the wash
cabinet and cut off the power cord. For
environmental and safety reasons
ensure the machine is completely
drained of any residue water and
cleaning agent. (Observe safety
regulations and wear safety goggles
and gloves). Make the door lock
inoperative, so that children cannot
accidentally shut themselves in. Make
appropriate arrangements for the safe
disposal of the machine.
If the machine contains a tank system,
remove the water from the tank before
disposing of the machine.
The manufacturer cannot be held
responsible for any damage caused
through non-observance of these
Warning and Safety Instructions.
IMPORTANT SAFETY INSTRUCTIONS
7