Filter
Top Products
,
All electrical work must be
carried out by a qualified electrician
in accordance with local and
national safety regulations.
The machine comes equipped for
connection to a 208 V, 60 Hz, 3 phase
power supply. It is equipped with a 6 ft.
(1.8 m) long, 12/4 AWG power cord,
without a plug. A plug, rated for the
required power which will fit the
receptacle, is to be supplied by the
electrician doing the installation. It
should be connected to the main power
supply.
Voltage: 208 V, 3 phase
Frequency: 60 Hz
Rated Load: 6 kW
Circuit breaker: 3 x 20 A
Black : connect to L1 (hot)
Red: connect to L2 (hot)
White: connect to L3 (hot)
Green: connect to GND (ground)
It can be converted to use a single
phase power supply in accordance
with the conversion and wiring diagram.
The cord must be changed from a 12/4
AWG to a 10/3 AWG. Contact Miele
Technical Service for more information.
Voltage: 208 V, 1 phase
Frequency: 60 Hz
Rated Load: 6 kW
Circuit breaker: 2 x 30 A
^
A damaged power cord must only be
replaced with a genuine Miele cord
by a Miele service technician.
WARNING
THIS APPLIANCE MUST BE
GROUNDED
Electrical connection
47