Filter
Top Products
Cancelling a program
If a program needs to be interrupted or
cancelled:
1. In operating levels B or D
^
Press the "Stop" 7 button (the
program is interrupted).
>CANCEL< OR >CONTINUE<
appears in the display.
^
Open the door.
Important for machines with a
clean and an unclean side:
With the setting "WITHOUT DOOR
INTERLOCK" - "YES" the doors on
either the clean or unclean side can
be opened. If the setting "WITHOUT
DOOR INTERLOCK" - "NO" is
selected, only the door on the
unclean side can only be opened at
this stage.
,
Caution! Water and items in the
machine may be hot. There is a
danger of burning or scalding.
^
Arrange the parts securely observing
any protective measures.
^
Close the lift door.
^
Press the "Start" 6 button. The
program continues.
2. In operating levels A or C
^
Press the I-0 button. The program is
interrupted.
Select operating level B or D.
(Note: you will be asked for your code.)
Proceed as follows:
^
Press the On-Off I-0 button. The
machine continues.
^
Press 1 and 2 at the same time.
Operating levels A B C D will appear
in the display.
^
Select operating level B or D with the
1 or 2 key.
^ Press 6 to confirm selection.
^ Enter code when requested by the
display.
^ Press the "Start" button 6.
[0000] appears.
^ Enter numbers using the 4 and 3
keys.
^
Select number position with the 1 or
2 key.
^
To confirm code press 6.
If you enter it incorrectly: FALSE CODE,
ENTER AGAIN will appear in the
display.
^
In operating levels B or D proceed as
described under 1.
Operation
30