Filter
Top Products
Changing the coarse filter
The coarse filter should be changed
when the message "CHANGE TA
COARSE" flashes in the display.
^
Open the door of the storage cabinet.
^ Take out the metal perforated plate at
the drying unit.
^
Change the coarse filter. The soft
filter side must face the front with the
part imprinted.
^ Replace the perforated plate by
positioning it at the base and
pressing it into place at the top.
After the coarse filter has been
changed set the operating timer to
zero, as follows:
^ Select the program CHANGE TA
COARSE (see "Operating - B. Free
program selection).
^
Press the "Start" 6 button.
When the service program has ended,
a message appears in the display.
^
Confirm the instruction >CONTINUE<
with 6.
Drying unit (TA) - Cleaning and care
36