Filter
Top Products
Replacing the HEPA-Filter
The HEPA filter should be changed
when the message "CHANGE FINE
FILTER" flashes in the display.
,
This filter should only be
changed by a Miele Service
Technician.
A smooth operation of the machine can
only be achieved if an original "Miele"
HEPA-filter is used.
After the HEPA filter has been changed
set the operating timer to zero, as
follows:
^ Select the program CHANGE TA
FINE (see "Operating - B. Free
program selection).
^ Press the "Start" 6 button.
When the service program has ended,
a message appears in the display.
^ Confirm the instruction >CONTINUE<
with 6.
The service programs CHANGE TA -
COARSE and FINE were set by
default to program places 62 and
63, but they can be moved to other
program places. See "System
functions" in the Programming
Manual.
Drying unit (TA) - Cleaning and care
37