Filter
Top Products
With the aid of the following guide,
minor problems can be fixed without a
service call.
Repairs should only be carried out by a
qualified and trained person in
accordance with local and national
safety regulations. Unauthorized repairs
could cause personal injury or machine
damage. In the event of any problems
which cannot be corrected, please
contact the Miele Technical Service
Department.
Messages regarding the operating
status of the machine and fault
messages are shown in the display.
The error message table is
supplied in the Programming
manual under "Messages".
Heater limiter
This machine has a resettable heater
limiter which will shut off the elements in
the event of over-heating. This could be
caused for example, if large articles
cover the heating elements or if the
filters in the wash cabinet are blocked.
If the message "CHECK WASH
CABINET HEATING" is displayed (water
has not heated up in the wash cabinet
and the program takes too long):
^
Isolate and correct the cause of the
problem.
^ Remove the service panel (see
"Electrical connection").
^ Press the red-brown RESET button on
the temperature sensor on the right
side.
If this switch trips repeatedly, contact
the Miele Technical Service
Department before using the
machine further.
Frequently asked questions
38