Filter
Top Products
48
Maintenance and Repair (continued)
維護保養方法（續）
When icing is possibly underway
ሷר⋱Һᆹ
Turn off
〦
Water supply
hose
ͧᖛᾷ
1
Turn off the tap, and disassemble the water supply
hose.
(Refer to page 11 for proper
disassembly)
〦ᖛ㕻ㆊŊֲʁͧᖛᾷȯ
(བྷֲᅞᘍ
11)
Select "TUB CLEAN" process, and
press "START" button to begin
operation.
ⴆႹȵᾉᛤᘺȶỄŊྈȵ Ւȶྈ⸹Ŋ
⳥Ⱨȯ
Remove the water supply hose, with
hose outlet facing down.
ֲʁͧᖛᾷŊםቄʁȯ
• Place water basket under the water supply hose to supply
water.
ͧᖛᾷʁᄍ⇦ᖛጝŊᖛȯ
Operation stops after 30 seconds.
⳥Ⱨ 30 ấ⾝രϟᔋȯ
• Remove the remaining water in water supply hose.
ぜͧᖛᾷҙ᱿ᔬᖛȯ
Put down the water drainage hose.
ᄍʁᖛⰖᾷȯ
Set "SPIN" to operate for 30 seconds. 40
⥑હȵ⌉ᖛȶŊ⳥Ⱨ30 ấ⾝ȯ 40
Cut off the power supply.
ӡᅜヅ
• To drain the water remained in the washing Ć spinning
basket, the water draining valve shall be kept open.
ӛᘺ⠥Ć⌉ᖛᐥُᖛⰖᾷҙᔬᮽ᱿ᖛŊ͐ᖛ⿿Ύྃ
ۓȯ
1
2
3
4
5
6
When icing happens ॖኞҺᆹ
Connect the water supply hose to the tap, and check
the washing machine to be sure the water supply and
drainage are in normal operation.
Ҫ૽ͧᖛᾷ⎏ᖛ㕻ㆊŊᒑውᘺ⠥ᑨᆯ؋ᔌⳖ⠗ͧᖛȮ
ᖛՒ̳ȯ
When reassembling the disassembled water supply
hose in case of out of water supply, please turn off the
tap, select "TUB CLEAN" process, press "START"
button, and slowly open the tap.
ϟᖛരדᇺᆹֲʁͧᖛᾷരҪ⡶ⶪ᱿ᗼʁŊ⦼〦ᖛ
㕻ㆊŊⴆႹȵᾉᛤᘺȶỄŊྈʁȵ Ւȶྈ⸹Ŋ༌
ᖛ㕻ㆊȯ
7
3
1
2
Disassemble the water supply hose, and
put it into the warm water at 40
o
C.
ֲʁͧᖛᾷŊᄍҘ 40
o
C ఢ᱿ᝐᖛʑȯ
Pour the warm water at about 40
o
C into the
basket.
߱ᾉҙΪҘ 40
o
C ఢ᱿ᝐᖛȯ
⥘