Filter
Top Products
11
Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 3.1
OL-1846-06
Avaya Definity Gx/PBXLink Integration Guide for Cisco Unity 3.1
Programming the Avaya Definity/PBXLink Phone System
To set up coverage paths for more than eight voice messaging ports
Step 1 For a phone system with more than eight voice messaging ports, use the Add Vdn <extension number>
command (for example Add Vdn 2000) to set up a vector directory number for the pilot number
(extension 2000 in this example). Set the following options and press Enter.
Step 2 Use the Add Vector 1 or the Change Vector 1 command to define the vector for voice messaging port
extensions that answer calls. Set the options according to one of the following examples Then press
Enter.
For a system with a single PBXLink digital port, use the following example of a system with six lines.
For a system with two PBXLink digital ports, use the following example, which bridges every second
extension to Port A and the remaining extensions to Port B.
Table 10 Vector Direction Number Options
Option Setting
Extension <the pilot number>
Name VoiceMail 2000
Display Override? n
COR 1
Vector Number 1
(must match the Number option in Table 11)
Measured none
Table 11 Vector Definition Options for a Single Digital Port
Option Setting
Number 1
(must match the Vector Number option in Table 10)
Name voicevec
ASAI Routing? n
Basic? y
Prompting? n
01 wait time 0 secs hearing ringback
02 route to number 2001 if unconditionally
(use the first voice messaging port extension)
03 route to number 2002 if unconditionally
04 route to number 2003 if unconditionally
05 route to number 2004 if unconditionally
06 route to number 2005 if unconditionally
07 route to number 2006 if unconditionally
08 busy