Clanking noise in the
drum.
Metal objects such as coins, pins
may be in the drum.
Stop the program cycle (See
“CancellingaProgram”),checkthe
drum for any foreign objects.
Water fill temperature is
incorrect.
Water inlet hoses or valves may
be clogged.
Disconnect inlet hoses from the
valves. Clean inlet strainers and valve
filters of any debris.
There may be a long distance
between the water heater and
washer.
Run the hot water faucets in the
bathroom or kitchen (whichever is
close to the location of your washer)
for a short time to purge the hot
water line.
There may be a problem with
water heater.
Be sure that your water heater is
delivering hot water min 120F (49C)
at the faucet.
Detergent residue left on
the laundry.
Excessive laundry might have
been loaded in.
Do not load the washer in excess.
Wrong program cycle and
temperature might have been
selected.
Select the proper program cycle
and temperature for the laundry to
bewashed(See“LaundryTips”&
“ProgramCycleSelection”).
Using insufficient amount of
detergent.
Use the recommended amount of
HE detergent appropriate for water
hardness and soil level of laundry.
Using powder or granular
detergents in cold water washing
may leave residue on wash load.
Try to use a liquid detergent when
washing in cold water.
Using wrong type of detergent.
Use liquid detergent for cold wash
cycle for good wash results. Use
proper detergents recommended for
wools, handwashable and delicate
items.
Clothes get tangled up
too much in the drum
when washing.
Excessive laundry might have
been loaded in.
Do not load the washer in excess.
Washing many items of the same
type or size of clothes together.
Load the wash drum with items of
different sizes.
Load is wrinkled.
Delay in unloading the washer.
Unload the washer as soon as the
wash cycle ends.
Wrong program cycle might have
been selected.
Select the proper program cycle
for the laundry to be washed (See
“LaundryTips”&“ProgramCycle
Selection”).
Excessive laundry might have
been loaded in.
Do not load the washer in excess.
40 EN