Blomberg WM 87120 NBL00 Washer User Manual


  Open as PDF
of 44
 
24 EN
decreased.
• Anti-Crease
With this function ( d), drum movement
will be lessened to prevent creasing and
spinning speed is limited. In addition,
washing is carried out at a higher water
level.
•Usethisfunctionfordelicatelaundries
that crease easily.
C Whenever you select this auxiliary
function, load your washer with half of
the maximum laundry specified in the
program table.
Time display
The display shows the time remaining
for the program to complete while a
program is running. Time is displayed in
hours and minutes as “01:30”.
Time delay
With the “Time delay” function you can
delay the program start up to 24 hours.
Setting can be made in intervals of 30
minutes.
1. Open the loading door, place the
laundry inside and fill detergent
drawer.
2. Set the washing program,
temperature, spin speed and,
if required, select the auxiliary
functions.
3.Press“Timedelaying”buttons“+”
and “-” to set your desired time delay.
The Time delaying symbol will flash.
4.Press“Start/Pause/Cancel”button.
Then the time delay starts to count
down. The Time delaying symbol will
light up. The Start symbol will light
up.
The “:” in the middle of the displayed
time delay will start to flash.
• More laundry may be loaded or taken
out during the time delay period. At
the end of the time delay countdown
process, time delaying symbol
fades and the washing starts as the
program duration is displayed.
Changing the delay time
If you want to change the time during
the countdown:
1.Press“Start/Pause/Cancel”button.
“ : “ in the middle of the screen will
stop flashing. The Standby symbol
will light up. The Time delaying
symbol will flash. The Start Symbol
will fade.
2.Press“Timedelaying”buttons“+”or
“-” to set your desired time delay.
3.Press“Start/Pause/Cancel”button.
The Time delaying symbol will light
up. The Standby symbol will fade.
The Start symbol will light up.
4. The “:” in the middle of the displayed
time delay will start to flash.
Canceling the time delay
If you want to cancel the time delay
countdown and start the program
immediately:
1.Press“Start/Pause/Cancel”button
The “:” in the middle of the displayed
time delay will stop flashing.
2. Start symbol will fade. The standby
symbol and the time delaying symbol
will flash.
3.Presstimedelayingbutton“-”to
decrease the desired time delay.
Programdurationafter30minutes
shall be displayed.
4.PressStart/Pause/CancelButtonto
start the program.
 previous next