Filter
Top Products
55
THE DATA LABEL
1. MODEL DRYER
The model number is an ADC number which describes the size of the dryer and the
type of heat (gas, electric, or steam).
2. SERIAL NUMBER
The serial number allows ADC to gather information on your particular dryer.
3. MANUFACTURING CODE NUMBER
The manufacturing code number is a number issued by ADC which describes ALL
possible options on your particular model.
4. TYPE OF HEAT
The type of heat describes the type heat for your particular dryer; gas (either natural
gas or liquid propane [L.P.]), electric or steam.
5. HEAT INPUT (for GAS MODELS ONLY)
This describes the heat input in British Thermal Units per Hour (BTUH).
6. ORIFICE SIZE
Gives the number drill size used.
7. ELECTRIC SERVICE
This describes the electric service for your particular model.
8. GAS MANIFOLD PRESSURE
-- This describes the manifold pressure taken at the gas valve tap.
9. APPLICABLE APPROVAL SEAL(S)
-- I.E., American Gas Association, Canadian Gas Association.