Filter
Top Products
37
NOTES:1. If the Anti-Wrinkle program is active, the L.E.D. (light emitting diode) display will continue
to read "donE," and the microprocessor controller (computer) will proceed through the
Anti-Wrinkle program until the maximum "Active Guard Time" has expired or until the door
is opened, whichever comes first. The L.E.D. display will read "FILL" and/or "Amount to
Start".
2. If the Anti-Wrinkle program is not active or in use, the L.E.D. (light emitting diode) display
will read "FILL" and/or "Amount to Start."
3. Free Dry Mode (Computer Models)
a. When turning on power or when no cycle is in progress, the L.E.D. (light emitting diode) display will read
"FILL" and/or "FrEE."
b. Select temperature...
The dryer will start, the L.E.D. (light emitting diode) display will read the temperature cycle selected, and
the drying time portion of the L.E.D. display will read "00" and count upward as time elapses, or the
vented time will count downward, depending on the program parameter setting.
NOTE: If the door is opened during a cycle, both the heat and motor will stop. However,
the microprocessor controller (computer) will continue to count down in time. Continuation of
the cycle will resume only after the door has been closed and any other of the three (3)
temperature selection buttons is again depressed.
c. Once the preprogrammed dryness level and cool down period has been reached or maximum automatic
time has expired, whichever comes first, the tone (buzzer) will sound for five (5) seconds, and the L.E.D.
(light emitting diode) display will read "donE," at which time the dryer will shut off.
NOTES:1. If the Anti-Wrinkle program is active, the L.E.D. (light emitting diode) display will continue
to read "donE," and the microprocessor controller (computer) will proceed through the
Anti-Wrinkle program until the maximum "Active Guard Time" has expired or until the door
is opened, whichever comes first. The L.E.D. display will read "FILL" and/or "FrEE."
2. If the Anti-Wrinkle program is not active or in use, the L.E.D. (light emitting diode) display
will read "FILL" and/or "FrEE."