Filter
Top Products
35
K. PREOPERATIONAL INSTRUCTIONS
OPL MODELS
1. To start the dryer:
a. Microprocessor (Computer) Dryers.
1) The L.E.D. (light emitting diode) display will read "FILL."
2) Press the "E" on the touch pad of the keyboard.
3) The L.E.D. (light emitting diode) display will quickly show "Ld30," "LC04," "F180." The dryer will
start, and the L.E.D. display will show "dr30."
b. Duel Timer Dryers
1) Turn drying timer knob for a time of 20 minutes
2) Select "High Temp."
3) Push "Push to Start" switch.
4) To Stop dryer, open the main door.
COIN MODELS
1. Automatic Mode (Microprocessor [Computer] Models)
a. When turning on power or when no cycle is in progress, the L.E.D. (light emitting diode) display will read
"FILL" and/or "Amount to Start."
b. Insert coin(s)...
Once correct "Amount to Start" has been inserted the L.E.D. (light emitting diode) display will read
"PUSH."
c. Select temperature by pushing "HI TEMP," "LO TEMP," or "PERM PRESS." The dryer will start, the
L.E.D. (light emitting diode) display will read the temperature cycle selected, and the drying time portion
of the L.E.D. display will read "00" and count upward as time elapses.