Filter
Top Products
40
K. Dryer is tripping the burner hi-limit safety thermostat...
1. Insufficient exhaust duct work...size or restriction in exhaust system.
2. Insufficient make-up air.
3. Lint screen needs cleaning.
4. Damaged impellor (fan).
5. Impellor/fan spinning in the wrong direction.
L. Display reads Temp Sensor Fail Check Temp Sensor Fuse. Dryer Sensor Circuit Failure...
1. Check 1/8 amp fuse on computer.
2. Faulty microprocessor temperature sensor probe.
3. Open circuit in either one of two (2) wires leading from the sensor probe to the computer.
a. Connection at sensor bracket assembly connector.
b. Connection at computer harness connector.
M. Dryer
does not start. Display reads Lint Door...
1. Lint drawer is open.
2. Faulty lint door switch.
3. Open circuit in lint drawer switch harnesses.
N. There is excessive vibration coming from the tumbler (basket)...
1. Tumbler (basket) is out of adjustment.
2. Drive wheels have failed.
3. Failed tumbler (basket) support.
O. Dryer does not start. Display reads Main Door...
1. Main door is open.
2. Faulty main door switch.
3. Open circuit in main door switch harness.