Filter
Top Products
39
6. Faulty gas valve.
7. No voltage to gas valve.
8. Poor airflow due to restriction in exhaust or dirty lint screen.
H. Dryer operates but is taking too long to dry...
1. An inadequate exhaust duct work system.
2. Restriction in exhaust system.
3. Insufficient make-up air.
4. Poor housekeeping...Dirty or clogged lint screen.
5. Washing machine extractors are not performing properly.
6. An exceptionally cold/humid or low barometric pressure atmosphere.
7. The supply gas may have a low heating value, check with local gas supplier.
8. Failed temperature sensor (temperature calibration is incorrect).
9. Failed microprocessor controller (computer).
I. Thermal overload for drive motor is tripping...
1. Either an exceptionally low or high voltage supply.
2. Motor bearing failure.
3. Bearing failure in drive system.
4. Failed motor.
5. Insufficient make-up air.
J. Overload for impellor (fan) motor is tripping...
1. Either an exceptionally low or high voltage supply.
2. Motor bearing failure.
3. Failed motor.
4. Failed overload.
5. Out of balance impellor (fan).
6. Insufficient make-up air.