Filter
Top Products
13
SINGLE DRYER VENTING
IMPORTANT: For exhaust duct runs up to 20 feet (6 meters), a minimum size of 10-inches (25 cm)
must be used.
HORIZONTAL VENTING
When a single 10-inch (25 cm) horizontal vent is used, the duct work to the outlet cannot exceed 20 feet (6 m)
(refer to Illus. A below). This calculation of 20 feet (6 m) compensates or allows for the use of a maximum of
only one (1) elbow (which is the outside outlet protection).
Illus. A