Filter
Top Products
40
1) Display will read “READY” (meaning no cycle in progress).
2) Press the letter on the keyboard (touchpad) corresponding to the cycle desired (i.e., Key “E”). Dryer
will start to rotate.
3) L.E.D. display will now toggle “Drying” “manual” “Cycle” “30 Min” “Remain” meaning the dryer is
in the drying cycle and count down in minutes.
NOTE: Pressing touchpad key “A,” “B,” “C,” “D,” and “F” will also start the dryer. The six (6)
preprogrammed drying cycles (“A” - “F”) have been stored in the microprocessor (computer’s)
memory. Refer to the Computer Programming Manual supplied with dryer for more specific
operating information.
NOTE: The dryer can be stopped at any time by opening main door or by pressing the “STOP” key.
To restart the dryer, press the “START” key or preprogrammed cycle key (i.e., “E”).
NOTE: Selection (setting) changes can be made at any time during the drying cycle by pressing the
“CLEAR/STOP” key twice. The L.E.D. display will return to “READY” at which time a new
cycle selection can be made.
b. Dual Timer Dryers
1) Turn drying timer knob to the desired number of drying minutes.
2) Turn cooling timer knob to the desired number of cooling minutes (fo follow drying minutes).
3) Select “High Temp,” “Lo Temp,” or “Perm Press.”
4) Push the “Push To Start” button.
5) To stop dryer, open the main door.
L. SHUT DOWN INSTRUCTIONS
If the dryer is to be shut down (taken out of service) for a period of time, the following MUST BE performed;
1. Discontinue power to the dryer either at the external disconnect switch or the circuit breaker.
2. Discontinue the heat supply:
a. GAS MODELS ... discontinue the gas supply.
1) SHUT OFF external gas supply shut-off valve.
2) SHUT OFF internal gas supply shut-off valve located in the gas valve burner area.
b. STEAM MODELS ... discontinue the steam supply.
1) SHUT OFF external (location furnished) shut-off valve.
2) SHUT OFF internal steam valves in the supply lines and the return lines.