Filter
Top Products
53
4. Failed basket (tumbler) support).
BB. Excessive noise and/or vibration...
1. Dryer is not leveled properly.
2. Impellor (fan/blower) out of balance ...
a. Excessive lint build up on the impellor (fan/blower).
b. Failed impellor (fan/blower).
3. Loose basket (tumbler) tie rod.
4. Failed basket (tumbler) support.
5. Loose motor mount.
6. Failed idler bearing(s) or basket (tumbler) bearing(s).
7. V-belts too tight or too loose.
8. Tumbler bearing set screws are loose.
9. Failed motor bearing.
TIMER MODELS
A. Dryer will not start...both drive motor and blower (impellor/fan) motor are not operating and
indicator light is off...
1. Service panel fuse blown or tripped breaker.
2. Dryer control circuit L1 or L2 1/2-amp (Slo Blo) fuse is blown.
3. Open in main door switch ...
a. Main door is not closed all the way.
b. Main door switch is out of proper adjustment.
c. Failed main door switch.
d. Broken connection/wire somewhere in the main door switch circuit.
4. Failed push to start relay.
5. Failed 24 VAC step down transformer or fault in the wiring.
6. Failed heat timer.