Filter
Top Products
17
b. To decrease gap R, loosen (turn counterclockwise [CCW]) adjustment bolt B and tighten (turn clockwise
[CW]) adjustment bolt A.
c. To increase gap L, loosen (turn counterclockwise [CCW]) adjustment bolt B and tighten (turn clockwise
[CW]) adjustment bolt A.
d. To decrease gap L, loosen (turn counterclockwise [CCW]) adjustment bolt A and tighten (turn clockwise
[CW]) adjustment bolt B.
6. Tighten and secure both adjustment bolts and jam (hex) nuts.
7. Tighten bearing bolts loosened in Step #3.
8. Check belt tension and make the necessary adjustments (follow Belt/Idler Tension Adjustment Procedure
in Section K).
9. Reinstall the upper half of the rear split back guard panel removed in Step #2.
10. Reestablish power to the dryer.