Filter
Top Products
19
Accumulative Coin (ACOn)
When this program mode (“ACOn”) is selected, additional time can only be achieved when the “Amount For
Additional Time” (“AFAt”) (PL13) has been inserted.
Single Coin Acceptor
Example No. 1: Using a 25¢ coin acceptor with the desired “Amount To Start” (“AtSt”) being 50¢ for 24
minutes, the Phase 3 microprocessor controller (computer) would yield more time (24 minutes)
only when an additional 50¢ is inserted. For this application, the “Time Per Left Coin” (“tPLC”)
program (PL11) is determined as follows:
Formula: (Total Vend Time/AtSt)(LCdE) = tPLC
(24/50)(25) = 12 minutes (tPLC)
Settings: PL09 (LCdE) ............25
PL10 (rCdE) .............12
PL11 (tPLC) .............50
PL12 (AtSt) ...............50
Dual Coin Acceptor
With dual coin acceptor the “Time Per Left Coin” (“tPLC”) is determined as follows:
Formula: (Total Vend Time/AtSt)(LCdE) = tPLC
Example No. 1: Using a 10¢/25¢ dual coin acceptor and the desired “Amount To Start” (“AtSt”) is 50¢ for 20
minutes and the “Amount For Additional Time” (“AFAt”) is set for 20¢, each additional 20¢
would yield 8 minutes.
Formula: (20/50)(10) = 4 minutes (tPLC)
Settings: PL09 (LCdE) ............10
PL10 (rCdE) .............25
PL11 (tPLC) ...............4
PL12 (AtSt) ...............50
PL13 (AFAt) .............20
Example No. 2: If the dryer is equipped with a 10¢/25¢ dual coin acceptor and the “Amount To Start” (“AtSt”)
is 35¢ for 14 minutes and the “Amount For Additional Time” (“AFAt”) is set for 25¢, each
additional 25¢ inserted would yield 10 minutes.
Formula: (14/35)(10) = 4 minutes (tPLC)
Settings: PL09 (LCdE) ............10
PL10 (rCdE) .............25
PL11 (tPLC) ...............4
PL12 (AtSt) ...............35
PL13 (AFAt) .............25