Filter
Top Products
45
Installation
Unpacking
All transit bolts and packing must be removed before using the appliance.
Using the supplied spanner, unscrew and
remove the rear right-hand bolt and lay the
machine on its back, taking care not to squash
the hoses. This can be avoided by placing one of
the corner packing pieces between the machine
and the floor.
Remove the polystyrene base and take off the
bottom panel by
unscrewing the
central screw.
Carefully slide out
the right poly-
thene bag.
Repeat the opera-
tion for the left
and central poly-
thene bags.
Re-fit the bottom
panel using the 4
screws supplied
with the door
hinges (in the plas-
tic bag) and the
previously removed
screw.
P025
132984470.qxd 09/10/2006 10.12 Pagina 45