AEG L 14510 VI Washer User Manual


 
Instructions for installation and electrical con-
nection
Safety instructions for the installer
This appliance is heavy, care should be taken when moving it.
When unpacking the appliance, check that it is not damaged. If in doubt,
do not use it and contact the retailer.
• All internal packing must be removed before using the appliance. Serious
damage may be caused to the machine or adjacent furniture if the protec-
tive transit devices are not removed or are not completely removed. Refer
to the relevant paragraph.
Any electrical work required to install this appliance must be carried out by
a qualified electrician or competent person.
• Any plumbing work required to install this appliance must be carried out
by a qualified plumber or competent person.
After having installed the machine, check that it is not standing on its elec-
trical supply cable.
If the appliance is placed on a carpeted floor, ensure that air can circulate
freely between the adjustable feet and the floor.
The installation should comply with local water authority and building reg-
ulations requirements.
Should the appliance power supply cable need to be replaced, this should
be carried out by our Service Force Centre.
43
132984470.qxd 09/10/2006 10.12 Pagina 43