Filter
Top Products
27
How to wash
At the end of the programme
The machine stops automatically. A blinking zero appears on the display.
The END light comes on in the programme progress display, the
START/PAUSE light is off.
Turn the selector dial to RESET.
If the RINSE HOLD option has been selected the END and the RINSE
HOLD lights remain lit, the door is blocked, to indicate that the water
must be emptied out before opening the door either
To empty out water:
• select the DRAIN programme to empty out the water without spin-
ning.
• select the SPIN or DELICATE SPIN programmes for spinning.
• select the SPIN SPEED and depress the START/PAUSE button;
Warning! The programme selector dial must be turned first to RESET
and then to the DRAIN or SPIN programmes.
At the end of the programme the selector dial must be turned to position
RESET and the machine must be switched off by pressing the ON/OFF button.
Remove the laundry from the drum.
Check that the drum is empty so as to avoid any forgotten items
being damaged in a subsequent wash (e.g. shrinking) or their colour
running into a load of whites.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleas-
ant smells.
132984470.qxd 09/10/2006 10.12 Pagina 27