AEG L 14510 VI Washer User Manual


 
Something not working?
If, during the spin cycle, the machine makes an unusual
whistling noise, different from the noise made by traditional
washing machines, this is due to a new type of
motor.
If water is not visible in the drum, this is due to the
modern technology of new washing machines that
use less water than traditional machines.
Troubleshooting
If a problem arises, you can try to solve it yourself following the instructions
below.
If you call out an engineer when one of the following problems arises, or
to repair a fault due to incorrect use, the call-out will be charged even
if requested within the guarantee period.
During machine operation the following alarm codes may be displayed:
- E10: problem with the water supply
- E20: problem with water draining
- E40: door open
At the same time the light END flashes and some acoustic signals can be
herd.
Once the problem has been eliminated, press the START/PAUSE button to
restart the programme. If after all checks, the problem persists, contact your
local AEG/ELECTROLUX Service Force Centre.
33
Problem
The machine does not work
Possible cause
The ON/OFF button Depress the button.
has not been depressed.
The main electrical or the Replace the fuse.
plug fuse have blown.
The door is not properly Close the door; the click
closed (E40). of the lock should be heard.
The plug is not connected. Insert the plug.
The START button has not Press the button.
been pressed.
The DELAY START Check the selected delay on
option has been selected. the display.
Solution
132984470.qxd 09/10/2006 10.12 Pagina 33