Filter
Top Products
Programme Option buttons
Depending on the programme, different functions can be combined.
These must be selected after choosing the desired programme and
before depressing the START/PAUSE button.
When these buttons are pressed, the corresponding pilot lights come on.
When they are pressed again, the pilot lights go out.
When an incorrect option is selected, the button light flashes for 2 se-
conds and in the display the Err message appears.
SPIN SPEED
Press this button to reduce the maximum speed of the final speed proposed
by the machine for the selected programme or to select RINSE HOLD option.
The maximum spin speed for cotton is 1400 rpm (for L14510VI), 1200
rpm (for L12510VI), for easy cares, wool 900 rpm and for delicates and
Miniprogramme 700 rpm.
RINSE HOLD
By selecting this option, the last rinse water is not emptied out, to
prevent the fabrics from creasing. When the programme has finished,
the pilot light END and RINSE HOLD on the programme progress display
are on, the pilot light START/PAUSE are off, on the display appears a
blinking zero and the door will be locked to indicate that the water must
be emptied out.
To empty out the water:
• select the DRAIN programme to empty out the water without spin-
ning.
• select the SPIN or DELICATE SPIN programmes for draining and spin-
ning.
• select the SPIN SPEED and depress the START/PAUSE button;
Warning! The programme selector dial must be turned first to RESET
and then to the DRAIN or SPIN programmes.
14
Description of the appliance
132984470.qxd 09/10/2006 10.11 Pagina 14