Inter-Tel 3000
Administrator’s Manual
105
• Select T1 (RBS).
• Select “Coding”.
• Two options are presented “AMI” or “B8ZS”.
• Select the required option.
The default setting is AMI. A solid diamond indicates the option selected.
Programming the Line Build-Out on the T1
The Line Build out can be set at 0dB, -7.5dB, -15dB or -22dB.
• From the programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “Lines”.
• Press the Scroll Down key () until “ T1 (RBS) or PRI (ISDN)” is displayed.
• Select T1 (RBS).
• Select “Line Build-Out”.
• Select the required option.
The default is -7.5 dB.
Programming the Line Types on the T1
The Line Type can be set as E&M (default), DID, Loop Start or Ground Start.
• From the programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “Lines”.
• Press the Scroll Down key () until “T1 (RBS) or PRI (ISDN)” is displayed.
• Select T1 (RBS).
• Select “Line Type”.
• Select the required option.
The default is that all lines are set as E&M.
Programming the Service Types
Once the line type is selected the Service Types relevant to the particular type of line is presented.
For E&M Line Type the following Service Types are available: -
None - No Service Type is set.
ANI
DNIS
*ANI*
*DNIS*
*ANI*DNIS*
• From the programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “Lines”.
• Press the Scroll Down key () until “T1 (RBS) or PRI (ISDN)” is displayed.
• Select T1 (RBS)
• Select “Line Type”.
• Select “E&M” line type.
• Select one of the options listed above.
The default setting is “None”; A solid diamond indicates current selection.
For DID Line Types the following options are available: -
None - No Service Type is set.
ANI
DNIS
*ANI*
