Inter-Tel 3000
Administrator’s Manual
93
ADDITIONAL PROGRAMMING OPTIONS
SYSTEM LANGUAGE
The Text, Voice Module and Courtesy Service prompts can be programmed to be in English, French or
Spanish. The default language is English.
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “System”.
• Select “Language”.
• Select “Text Prompts” to change the text prompts for every digital telephone set
• Select “Courtesy Service” to change the language on the Internal Courtesy source
• Select “Voice Module” to change the Voice Mail and Auto Attendant language
• Select the language required.
Press the speakerphone key to finish programming.
Note: Each extension can change the language on their own phone. See page
21.
TO CHANGE THE PROGRAMMING EXTENSION
System programming can only be carried out at one digital telephone set, that is, the digital telephone set
connected to the programming extension. By default, extension 20 is the programming extension. The
programming extension can be changed to any other extension.
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “System”.
• Select “Programming Position”.
• Select the extension you wish to have as the programming extension. The selected programming
extension is denoted by a “♦”.
Press the speakerphone key to finish programming.
TO CHANGE THE SYSTEM PROGRAMMING
PASSWORD
The default System Programming Password (1111) can be changed to any four-digit number.
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “System”.
• Select “Change Password”.
• Select “System Password”.
• Select “Change” and enter the four-digit number you require.
• Select “Confirm”.
Press the speakerphone key to finish programming.
